10/100M Media Converters
- Model: Model No.: LT-MC60F Series
LT-MC60F Series Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base–TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120 km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in Multi-mode dual fiber, single mode dual fiber, single mode single fiber\
Features:
● 10/100Mbps auto-sensed, facilitating network upgrade
● Built-in efficient switching core to implement flow control and reduce broadcast packets
● Full-duplex and half-duplex auto-sensed
● Supporting auto-sense of MDI/MDI-X, facilitating system commissioning and installation
● Supporting half /full-duplex of FX.
● Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission.
● Supporting the transmission of 100Base-FX or STM-1, compatible with other devices
● Supporting low-time lag transmission
● Supporting the transmission of extra-long packets up to1600 bytes
● Extremely low power consumption (less than 1W), reliable and stable performance
● Options in Multi-mode dual fiber, single mode dual fiber, single mode single fiber
● Transmission distance 2KM～100KM optional
● 2KV surge protection, ESD: Air-15kV, Contact-8kV protection
Port interface | ||||
Fixed port | 1*100 Base-X SC port(FC/ST optional)+1*10/100 Base－T RJ45 port | |||
Power interface | DC jack | |||
Ethernet standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow Control | |||
LED indicators | ||||
PWR | Power supply indicator | |||
FDX | Electrical port operation mode indicator | |||
Link/Act | Link state indicator | |||
Copper 100M Link | Electrical port speed rate indicator | |||
Fiber 100M Link | Fiber port speed rate indicator | |||
Cable type & transmission distance | ||||
Twisted-pair | 0-100m（CAT5e,CAT6） | |||
Multimode optical fiber | 2KM | |||
Single mode dual fiber | 20/40/60/80/100/120KM | |||
Single mode single fiber | 20/40/60/80/100KM | |||
Electrical specification | ||||
Input voltage | DC 5V | |||
Total Power consumption | ≤0.8W | |||
Layer 2 switching | ||||
Switching capacity | 1G | |||
Packet forwarding rat） | 0.744Mpps | |||
MAC address table | 2K | |||
Buffer | 2K | |||
Forwarding delay | <5us | |||
MDX/MIDX | Support | |||
Environment | ||||
Operating temperature | -20℃~70℃ | |||
Storage temperature | -40℃~85℃ | |||
Relative humidity | 5%~95% （non-condensing） | |||
Thermal methods | Fan-less, natural heat dissipation | |||
MTBF | 100,000 hours | |||
Protection & Certification | ||||
Ethernet port surge protection | IEC 61000-4-5 Level 3（2KV）（10/700us） | |||
ESD | IEC 61000-4-2 Level 4 （8K/15K） | |||
Free fall | 0.5m | |||
Certification | CE, FCC, RoHs,CCC | |||
Structure | ||||
Dimension(mm) | 93*71*27mm | |||
Installation method | Desktop, wall-mount | |||
Weight | Net weight 0.2KG | |||
Model | Description |
LT-MC60F-SC02 | 10/100Base-TX to 100Base-FX, multi-mode, 2km, SC, standalone, external power adaptor |
LT-MC60F-SC20 | 10/100Base-TX to 100Base-FX, single mode dual fiber, 20km, SC, standalone, external power adaptor. 40/60/80/100/120KM optional, ST/FC optional |
LT-MC60F-SC20A | 10/100Base-TX to 100Base-FX, single mode single fiber, 20km, SC, TX1310nm, standalone, external power adaptor; 40/60/80/100KM optional, ST/FC optional |
LT-MC60F-SC20B | 10/100Base-TX to 100Base-FX, single mode single fiber, 20km, SC, TX1550nm, standalone, external power adaptor; 40/60/80/100KM optional, ST/FC optional |