16*100/1000Base-X SFP+8*1G Combo+ 4*1G/2.5/10GBase-X SFP+ Layer 3 Managed Industrial Rack-mount Switch
- Model: LT-IS6528XG-4XS16GX8GC
Overview
The SmileNet LT-IS6528XG-4XS16GX8GC is the highly reliable Layer 3 managed industrial fiber switch with 16-port 100/1000Base-X SFP ,8-port 1000Base Combo and 4-port 10G Base-X SFP+. With full gigabit downlink and 10G uplink capability, it can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. It supports DI/DO/RS485/Modbus data, G.8032 ERPS, MSTP/ RSTP/STP redundancy technologies and supports Layer 3 routing functionality, which all making them ideal for large-scale industrial networks.
LT-IS6528XG-4XS16GX8GC is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range voltage input with redundant power design AC、DC or AC/DC selection, robust IP40 fan-less housing with rack-mount installation, wide operation temperature from -40°C to80 °C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*100/1000Base-X SFP, 8*1000Base Combo, 4*1G/2.5/10GGBase-X SFP+
➢ AC/DC redundant power supply with polarity reverse/over-voltage/over-current protection
➢ Support USB one key configuration and upgrading
➢ Support DI/DO/RS485/Modbus data
➢ Layer3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoSandSFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol,recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less andrack-mount hardware design
➢ Operation temperature:-40 ℃ ~+ 80℃
Model No. | LT-IS6528XG-4XS16GX8GC-U/LT-IS6528XG-4XS16GX8GC-U-D | |||
Interface | 10G Fiber ports | 100/1000 Fiber ports | GigabitCombo | |
4 | 16 | 8 | ||
Ethernet | 16*100/1000Base-X SFP 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ | |||
Management port | 1*RJ45 Console port (115200,8,N,1)，1*USB 2.0 | |||
Data & Alarm channel(optional) | 1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
P (Power indicator) | Off:the device is power off or failed | On: the device power on is normal | ||
S (System status indicator) | Blinking: device initialization | On: device on normal operation | ||
USB (USB status indicator) | Off: USB flash drive not insert or not detected by device | |||
On: USB flash drive is detected by device | ||||
Blinking: the device is reading and writing the data from USB flash drive | ||||
ALM(Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm | ||
1-8(Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
1-8(Copper speed indicators) Yellow | Off:port speed is10/100M | |||
On:port speed is 1000M | ||||
1-8(Fiber ports indicators) Green
| Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
9-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | 36-75VDC 100~240VAC redundant power input | |||
Input current | 1.2A DC/ACinput Max | |||
Total power consumption | Full loading ≤40W | |||
Connector | Removable 4-pin terminal block AC socket | |||
Reverse polarity protection | Support | |||
Over-voltage protection | Support | |||
Over-current protection | Support | |||
Layer 2 functions | ||||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control Support interface counters Support port isolation Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) | |||
Mac-address tablemanagement | Support static Mac-addressmanagement Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN | |||
VLAN | Support access mode Support trunk mode Support hybrid mode | |||
VLAN classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | |||
GVRP | Normal mode Fixed mode Forbidden mode | |||
QinQ | Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ | |||
LLDP | LLDP (Link Layer Discovery Protocol) | |||
Ring network protocol | Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP | |||
Support G.8032 ERPS protocol，single ring, sub Ring andmajor ring Recovery time ≤20ms | ||||
L2 Multicast | ||||
IGMP snooping | Support IGMP snooping | |||
Group address | Support group address | |||
Security functions | ||||
ACL | IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL | |||
QoS | Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS | |||
802.1x | Port access control Mac-address access control RADIUS server | |||
Port-security | Port-security | |||
IP source guard | IP Port/MAC binding | |||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | |||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | |||
Management & Maintenance functions | ||||
User Management | Support password protection Support user authorization management | |||
SNMP | Supporting SNMPV1/V2C/V3 version | |||
Web Management | Web Management Support HTTP V1.1 Support HTTPS | |||
CLI management | Console/Telnet command line management | |||
RMON | Support RMON(Remote Monitoring) alarm | |||
Firmware upgrade | Firmware upgrade | |||
Fault Detection | Ping/Tracerout Dying gasp Support optical transceiver DDM function | |||
Cable detection | Support copper port cable detection | |||
NTP | Network Time Protocol | |||
Syslog/Debug | Syslog/Debug Syslog send tothree servers | |||
Configuration import/export | Support FTP/TFTP remote import/export Support USB import/export | |||
Dual partition management | Support dual partition switching | |||
Application Protocol Functions | ||||
DHCP Snooping | DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 | |||
DHCP client | Support DHCP client | |||
Telnet server | Support telnet server | |||
Telnet client | Support telnet client | |||
SSH server | Support SSH server | |||
TACACS | Support TACACS(the terminal access controller accesses the control system) | |||
sflow | Support network traffic analysis | |||
TFTP | Support TFTP Client | |||
Layer 3 functions | ||||
ARP | ARP table aging | |||
DHCP server | ||||
IPv4 / IPv6 | static routing | |||
ECMP | Support ECMP (Equal-cost multi-path routing) | |||
Support the configuration of ECMP Max next-hop | ||||
Support capacity balanced configuration | ||||
Route policy | IPv4 prefix-list | |||
VRRP | Virtual Router Redundancy Protocol | |||
Routing Protocol Specification | ||||
RIP | RIPv1/v2 | |||
OSPFv2 | OSPFv2 | |||
BGP4 | BGP4 | |||
BGP Support Routing Recursive ECMP | ||||
Support to view the number of neighbors and up/down state | ||||
IS-IS | IS-ISv4 | |||
Routing entry | 13K | |||
Switching features | ||||
Switching capacity | 128Gbps | |||
Packet forwarding rate | 190.4Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12M bit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDX/MIDX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Rack mountable | |||
Dimension(W*D*H)mm | 440*44*280mm | |||
Weight | LT-IS6528XG-4XS16GX8GC-U:5kg; LT-IS6528XG-4XS16GX8GC-U-D:5.1kg | |||
Operating environment | ||||
Operating temperature | -40℃~+ 80℃ | |||
Storage/transportation temperature | -40℃~+ 85℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Industrial Standard | ||||
EMS | Surge protection of power: IEC 61000-4-5 DC:6KV/6KV(8/20us), AC: 4K/2K Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV（10/700us） RS：IEC 61000-4-3 80 MHz-1 GHz：10 V/m EFT：IEC 61000-4-4 power 4K, signal 2K CS：IEC 61000-4-6 10V ESD：IEC 61000-4-2 Contact: 8K；Air: 15K | |||
EMI | FCC Part 15B Class A | |||
Shock | IEC 60068-2-27 | |||
Free fall | IEC 60068-2-32 | |||
Vibration | IEC 60068-2-6 | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS6528XG-4XS16GX8GC-U | L3 Managed industrial Ethernet switch with 4*1G/2.5G/10G SFP+ fiber ports,16*100/1000Base-X and 8*Combo RJ45/SFP ports; Support redundant AC/AC, AC/DC, DC/DC; Rack mountable; Operation temperature-40°C to 80°C. |
LT-IS6528XG-4XS16GX8GC-U-D | L3 Managed industrial Ethernet switch with 4*1G/2.5G/10G SFP+ fiber ports,16*100/1000Base-X and 8*Combo RJ45/SFP ports; Support DI/DO and RS485, redundant AC/AC, AC/DC, DC/DC; Rack mountable; Operation temperature-40°C to 80°C. |