24*10/100/1000Base-T + 4*1G/2.5/10GBase-X SFP+ Layer 3 Managed Industrial Ethernet Switch
- Model: LT-IS6528XG-4XS24GT Series
Overview
The SmileNet LT-IS6528XG-4XS24GT series are the highly reliable Layer 3 managed industrial Ethernet switches with24-port10/100/1000Base-T RJ45and 4-port 1G/2.5G/10GBase-X SFP+. With full gigabit downlink and 10G uplink capability,they can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. LT-IS6528XG-4XS24GT series support DI/DO/RS485, G.8032 ERPS, MSTP/RSTP/STP redundancy technologies.They supportLayer 3 static routing& dynamic routing features androbust layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
LT-IS6528XG-4XS24GT series are also the high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, includingredundant power supply with DC12-75V input, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to80°C as well as high-level EMI/EMC capability.They are thebest choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features:
➢ 24*10/100/1000Base-T, 4*1G/2.5G/10G Base-X SFP+
➢ 12-75VredundantDCpowersupply with polarity reverse/over-voltage/over-current protection
➢ Support USB one key configuration & upgrading
➢ DI/DO/RS485 are optional
➢ Layer3features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoSandSFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol,recovery time ≤20ms
➢ Support6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less andDin-railhardware design
➢ Operation temperature:-40 ℃ ~+ 80℃
Model No. | LT-IS6528XG-4XS24GT/LT-IS6528XG-4XS24GT-D | ||
Interface | Fiber ports | CopperRJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 4*1G/2.5G/10GBase-X SFP+ | ||
Management port | 1*RJ45 Console port (115200,8,N,1)，1*USB 2.0 for configuration and firmware update | ||
Data& Alarm channel (optional) | 1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P1/P2 (Power indicator) Green | Off:the device is power off or failed | On: the device power on is normal | |
SYS(System status indicator) | Blinking: device initialization | On: device on normal operation | |
USB (USB status indicator) Green | Off: USB flash drive not insert or not detected by device | ||
On: USB flash drive is detected by device | |||
Blinking: the device is reading and writing the data from USB flash drive | |||
ALM(Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm | |
Ring(Ring network indicator) | Off: Ring network disable | On: Ring network enable | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24(Copper speed indicators) Yellow | Off:ports on 10/100M | ||
On:ports on 1000M | |||
25-28(Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-75VDC redundant power input | ||
Input current | 2.5A DC/DC input Max | ||
Total power consumption | Full loading ≤30W | ||
Connector | Removable 2*2-pin terminal block | ||
Reverse polarity protection | Support | ||
Over-voltage protection | Support | ||
Over-current protection | Support | ||
Layer 2 functions | |||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group | ||
Port features | Support IEEE802.3x flow control Support interface counters Support port isolation Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) | ||
Mac-address tablemanagement | Support static Mac-addressmanagement Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN | ||
VLAN | Support access mode Support trunk mode Support hybrid mode | ||
VLAN classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | ||
GVRP | Normal mode Fixed mode Forbidden mode | ||
QinQ | Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ | ||
LLDP | LLDP (Link Layer Discovery Protocol) | ||
Ring network protocol | Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP | ||
Support G.8032 ERPS protocol，single ring, sub Ring andmajor ring Recovery time ≤20ms | |||
L2 Multicast | |||
IGMP snooping | Support IGMP snooping | ||
Group address | Support group address | ||
Security functions | |||
ACL | IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL | ||
QoS | Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Port/MAC binding | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
Management & Maintenance functions | |||
User Management | Support password protection Support user authorization management | ||
SNMP | Supporting SNMPV1/V2C/V3 version | ||
Web Management | Web Management Support HTTP V1.1 Support HTTPS | ||
CLI management | Console/Telnet command line management | ||
RMON | Support RMON(Remote Monitoring) alarm | ||
Firmware upgrade | Firmware upgrade | ||
Fault Detection | Ping/Tracerout Dying gasp Support optical transceiver DDM function | ||
Cable detection | Support copper port cable detection | ||
NTP | Network Time Protocol | ||
Syslog/Debug | Syslog/Debug Syslog send tothree servers | ||
Configuration import/export | Support FTP/TFTP remote import/export Support USB import/export | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
DHCP Snooping | DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 | ||
DHCP client | Support DHCP client | ||
Telnet server | Support telnet server | ||
Telnet client | Support telnet client | ||
SSH server | Support SSH server | ||
TACACS | Support TACACS(the terminal access controller accesses the control system) | ||
sflow | Support network traffic analysis | ||
TFTP | Support TFTP Client | ||
Layer 3 functions | |||
ARP | ARP table aging | ||
DHCP server | |||
IPv4 / IPv6 | static routing | ||
ECMP | Support ECMP (Equal-cost multi-path routing) | ||
Support the configuration of ECMP Max next-hop | |||
Support capacity balanced configuration | |||
Route policy | IPv4 prefix-list | ||
VRRP | Virtual Router Redundancy Protocol | ||
Routing Protocol Specification | |||
RIP | RIPv1/v2 | ||
OSPFv2 | OSPFv2 | ||
BGP4 | BGP4 | ||
BGP Support Routing Recursive ECMP | |||
Support to view the number of neighbors and up/down state | |||
IS-IS | IS-ISv4 | ||
Routing entry | 13K | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12M bit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H)mm | 110*115*158mm | ||
Weight | LT-IS6528XG-4XS24GT: 2.2kg; LT-IS6528XG-4XS24GT-D: 2.3kg | ||
Operating environment | |||
Operating temperature | -40℃~+ 80℃ | ||
Storage/transportation temperature | -40℃~+ 85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | |||
EMS | Surge protection of power: IEC 61000-4-5 DC:6KV/6KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV（10/700us） RS：IEC 61000-4-3 80 MHz-1 GHz：10 V/m EFT：IEC 61000-4-4 power 4K, signal 2K CS：IEC 61000-4-6 10V ESD：IEC 61000-4-2 Contact: 8K；Air: 15K | ||
EMI | FCC Part 15B Class A | ||
Shock | IEC 60068-2-27 | ||
Free fall | IEC 60068-2-32 | ||
Vibration | IEC 60068-2-6 | ||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞200,000 hours | ||
Warranty | 5 years | ||
Model | Description |
LT-IS6528XG-4XS24GT | L3 Managed industrial Ethernet switch with4*1G/2.5G/10GBase-X SFP+ ports，24*10/100/1000Base-T RJ45 ports. Dual redundantDC 12-75V input，Din-rail installation; Operation temperature-40°C to80°C |
LT-IS6528XG-4XS24GT-D | L3 Managed industrial Ethernet switch with4*1G/2.5G/10GBase-X SFP+ ports，24*10/100/1000Base-T RJ45 ports.Support DI/DO/RS485;Dual redundantDC 12-75V input，Din-rail installation; Operation temperature-40°C to80°C |