48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed Ethernet switch
- Model: Model No.: LT-S8552XG-4XS48GT
SmileNet LT-S8552XG-4XS48GT is a Layer 3 Managed Gigabit Switch that provides high-density performance, Layer 3 static and dynamic routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 336 Gbps switching capacity and 4 *1G/2.5G/10Gbps flexible and high performance uplink capability . The LT-S8552XG-4XS48GT provides comprehensive end to end QoS as well as flexible and rich management , security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful WRR (Weighted Round Robin) and network security features also make the LT-S8552XG-4XS48GT perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
Features:
➢ 4*10G/2.5G/10G SFP+ ports uplink, 48 *10/100/1000BASE-T Gigabit Ethernet RJ45 ports downlink, 1* RJ45 console interface for switch basic management and setup
➢ Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP
➢ Port aggregation: Supports GE ports, 2.5GE and 10GE port aggregation, static and dynamic aggregation
➢ VLAN : Supports access, truck , hybrid mode and VLAN classification, including the Mac based VLAN, IP based VLAN and protocol based VLAN
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Port Mirroring: Many to one port mirroring
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: Supports IGMP snooping
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Engress port-based rate-limit and policy-based QoS
➢ Security: Support Dot1x，port authentication，mac authentication，RADIUS service; Support port-security, ip source guard，IP/Port/MAC binding, arp-check and ARP packet filtering for illegal users and port isolation
➢ Management : Supports LLDP, user management and login authentication; SNMPV1/V2C/V3; web management，HTTP1.1，HTTPS; Syslog; RMON （Remote Monitoring）alarm, event and history record; NTP, temperature monitoring; Ping、Tracert and optical transceiver DDM function; Supports TFTP Client, Telnet Server, SSH Server and IPv6 Management
➢ Firmware update, configure backup/restore through Web GUI, FTP and TFTP
Model No. | LT-S8552XG-4XS48GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 48 | ||
Ethernet | 48*10/100/1000Base-T RJ45 4*1G/2.5G/10GBase-X SFP+ | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
PWR(Power indicator) | Off:the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-48 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-48(Copper speed indicators) Yellow | Off:ports on 10/100M | ||
On:ports on 1000M | |||
49-52(Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | AC100~240V Frequency：50/60Hz | ||
Total power consumption | Full loading ≤40W | ||
Over-current protection | Support | ||
Layer 2 functions | |||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group | ||
Port features | Support IEEE802.3x flow control Support interface counters Support port isolation Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) | ||
Mac-address table management | Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN | ||
VLAN | Support access mode Support trunk mode Support hybrid mode | ||
VLAN classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | ||
GVRP | Normal mode Fixed mode Forbidden mode | ||
QinQ | Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ | ||
LLDP | LLDP (Link Layer Discovery Protocol) | ||
Ring network protocol | Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP | ||
Support G.8032 ERPS protocol，single ring, sub Ring andmajor ring Recovery time ≤20ms | |||
L2 Multicast | |||
IGMP snooping | Support IGMP snooping | ||
Group address | Support group address | ||
Security functions | |||
ACL | IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL | ||
QoS | Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Port/MAC binding | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
Management& Maintenance functions | |||
User Management | Support password protection Support user authorization management | ||
SNMP | Supporting SNMPV1/V2C/V3 version | ||
Web Management | Web Management Support HTTP V1.1 Support HTTPS | ||
CLI management | Console/Telnet command line management | ||
RMON | Support RMON(Remote Monitoring) alarm | ||
Firmware upgrade | Firmware upgrade | ||
Fault Detection | Ping/Tracerout Support optical transceiver DDM function | ||
Cable detection | Support copper port cable detection | ||
NTP | Network Time Protocol | ||
Syslog/Debug | Syslog/Debug Syslog send to three servers | ||
Configuration import/export | Support FTP/TFTP remote import/export | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
DHCP Snooping | DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 | ||
DHCP client | Support DHCP client | ||
Telnet server | Support telnet server | ||
Telnet client | Support telnet client | ||
SSH server | Support SSH server | ||
TACACS | Support TACACS(the terminal access controller accesses the control system) | ||
sflow | Support network traffic analysis | ||
TFTP | Support TFTP Client | ||
Layer 3 functions | |||
ARP | ARP table aging | ||
DHCP server | |||
IPv4 / IPv6 | static routing | ||
ECMP | Support ECMP (Equal-cost multi-path routing) | ||
Support the configuration of ECMP Max next-hop | |||
Support capacity balanced configuration | |||
Route policy | IPv4 prefix-list | ||
VRRP | Virtual Router Redundancy Protocol | ||
Routing Protocol Specification | |||
RIP | RIPv1/v2 | ||
OSPFv2 | OSPFv2 | ||
BGP4 | BGP4 | ||
BGP Support Routing Recursive ECMP | |||
Support to view the number of neighbors and up/down state | |||
IS-IS | IS-ISv4 | ||
Routing entry | 13K | ||
Switching features | |||
Switching capacity | 336Gbps | ||
Packet forwarding rate | 499.9Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12M bit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H)mm | 440*300*44mm | ||
Weight | 4.5kg | ||
Operating environment | |||
Operating temperature | 0℃~+ 50℃ | ||
Storage/transportation temperature | -10℃~+ 70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||