SmileNet LT-S8528XG-4XS16GT8GC is a Layer 3 Managed Gigabit Switch that provides high-density performance, Layer 3 static and dynamic routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 128 Gbps switching capacity and 4 *1G/2.5G/10Gbps flexible and high performance uplink capability . The LT-S8528XG-4XS16GT8GC provides comprehensive end to end QoS as well as flexible and rich management , security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful WRR (Weighted Round Robin) and network security features also make the LT-S8528XG-4XS16GT8GC perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
Model No. | LT-S8528XG-4XS16GT8GC | |||
Interface | Fiber ports | Copper RJ45 ports | Gigabit Combo | |
4 | 16 | 8 | ||
Ethernet | 16*10/100/1000Base-T RJ45 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ | |||
Management port | 1*RJ45 Console port (115200,8,N,1),1*USB 2.0 for configuration and firmware update | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
PWR (Power indicator) | Off:the device is power off or failed | On: the device power on is normal | ||
SYS(System status indicator) | Blinking: device initialization | On: device on normal operation | ||
USB(USB status indicator) | Off: USB flash drive not insert or not detected by device | |||
On: USB flash drive is detected by device | ||||
Blinking: the device is reading and writing the data from USB flash drive | ||||
1-16 (Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
17-24(Copper speed indicators) Yellow | Off:ports on 10/100M | |||
On:ports on 1000M | ||||
17-24(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
25-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | AC 100-240V | |||
Total power consumption | Full loading ≤25W | |||
Over-current protection | Support | |||
Layer 2 functions | ||||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control, Support interface counters, Support port isolation, Support storm control, Support network storm suppression based on port bandwidth percentage, Support Combo ports (RJ45/SFP) adaptive | |||
Mac-address table management | Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN | |||
VLAN | Support access mode Support trunk mode Support hybrid mode | |||
VLAN classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | |||
GVRP | Normal mode Fixed mode Forbidden mode | |||
QinQ | Port-based QinQ VLAN-based QinQ Flow-based QinQ | |||
LLDP | LLDP (Link Layer Discovery Protocol) | |||
Port mirroring | Many to one port mirroring | |||
IEEE802.1w RSTP | STP RSTP MSTP | |||
G.8032 ERPS protocol | Support G.8032 ERPS protocol,single ring, sub Ring andmajor ring Recovery time ≤20ms | |||
Loop detect | Loop detect based on ports Loop detect based on ports and VLAN | |||
Multicast functions | ||||
IGMP snooping | IGMP snooping | |||
Security functions | ||||
ACL | IP Standard ACL MAC extend ACL IP extend ACL L2/L3/L4 ACL IPv6 ACL | |||
QoS | Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS | |||
802.1x | Port access control Mac-address access control RADIUS server | |||
Port-security | Port-security | |||
IP source guard | IP Port/MAC binding | |||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | |||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | |||
Management& Maintenance functions | ||||
User Management | Support password protection Support user authorization management | |||
SNMP | Supporting SNMPV1/V2C/V3 version | |||
Web Management | Web Management Support HTTP V1.1 Support HTTPS | |||
CLI management | Console/Telnet command line management | |||
RMON | Support RMON(Remote Monitoring) alarm | |||
Firmware upgrade | Firmware upgrade | |||
Fault Detection | Ping/Tracerout Support optical transceiver DDM function | |||
Cable detection | Support copper port cable detection | |||
NTP | Network Time Protocol | |||
Syslog/Debug | Syslog/Debug Syslog send to three servers | |||
Configuration import/export | Support FTP/TFTP remote import/export Support USB import/export | |||
Dual partition management | Support dual partition switching | |||
Application Protocol Functions | ||||
DHCP Snooping | DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 | |||
DHCP client | Support DHCP client | |||
Telnet server | Support telnet server | |||
Telnet client | Support telnet client | |||
SSH server | Support SSH server | |||
TACACS | Support TACACS(the terminal access controller accesses the control system) | |||
sflow | Support network traffic analysis | |||
TFTP | Support TFTP Client | |||
Layer 3 functions | ||||
ARP | ARP table aging | |||
DHCP server | ||||
IPv4 / IPv6 | static routing | |||
ECMP | Support ECMP (Equal-cost multi-path routing) | |||
Support the configuration of ECMP Max next-hop | ||||
Support capacity balanced configuration | ||||
Route policy | IPv4 prefix-list | |||
VRRP | Virtual Router Redundancy Protocol | |||
Routing Protocol Specification | ||||
RIP | RIPv1/v2 | |||
OSPFv2 | OSPFv2 | |||
BGP4 | BGP4 | |||
BGP Support Routing Recursive ECMP | ||||
Support to view the number of neighbors and up/down state | ||||
IS-IS | IS-ISv4 | |||
Routing entry | 13K | |||
Switching features | ||||
Switching capacity | 128Gbps | |||
Packet forwarding rate | 190.4Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12M bit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDX/MIDX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Installation method | Rack mountable | |||
Dimension(W*D*H)mm | 440*245*44mm | |||
Weight | 4.0kg | |||
Operating environment | ||||
Operating temperature | 0℃~+50℃ | |||
Storage/transportation temperature | -10℃~+70℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | |||
MTBF | >100,000 hours | |||